Español 
Français 
Netherlands 
English 
Deutsch 
United Kingdom 
Filoform injection nipples and injection valves are are used for injection joints. The injection valve is positioned on the wrap-around gauze by using the wrap-around tape. The injection nipple is placed onto the resin pack in order to enable an easy and smooth injection of the resin into the joint.
- Recommended for injection joints on cables <4x25mm²
Injectionnipple 6,1mm
| Material | polystyrene |
| Inner diameter opening | 6,1mm |
| Outer diameter | Suitable for all common types of injectionvalves of 6,1mm |
| Version | Adhesive foam ring with a removable protection foil Very good adhesion, even with high and low temperatures. Suitable for all common types of resin packages. |
| Nipple construction | The resin package opens with the pressure of the injection pump. The nipple has 8 perforation teeth. |
Injectionvalve 6,1mm
| Material | Polyethylene |
| Inner diameter opening | 9,9mm |
| Diameter plate | 55mm |
| Version | Suitable for all common type of injectionnipples 6,1mm. |
| Valve construction | Provided with a non-return valve to prevent leakage of the resin |
| Home page product list | No |
|---|